Tehnička podrška kompanije Promat
Javite se našem timu za tehničku podršku ako imate pitanja u vezi sa rešenjima za pasivnu protivpožarnu zaštitu, našim proizvodima i sistemima ili vam treba savet za ugradnju...
Your Passive Fire Protection Plan
Are you building a roadtunnel, train tunnel or metrotunnel? For every type of large-scale underground structure you design, you will need to include a passive fire protection plan to protect it against fire. A complete passive fire protection plan, consists of 4 key building blocks:
1. Fire escape route
1. Fire escape route
Allow people enough time to react and evacuate
The escape route needs extra attention to guarantee a successful evacuation of all the people inside. Studies show that the actual time needed to evacuate a tunnel after a fire alarm might be longer than you would expect. This is why it is important that the escape route can resist the fire can withstand high temperatures for much longer, independently from the rest of the tunnel.
2. Compartmentation & fire stopping
2. Compartmentation & fire stopping
Prevent the fire from spreading through the building
If a fire can be contained within a closed compartment within the building, people can safely evacuate and fire fighters can extinguish the fire. Compartmentation is therefore one of the key elements in passive fire protection. Make sure walls, ceiling and floor will withstand fire and integrate fire resistant doors and all the necessary fire stopping solutions to prevent the fire from spreading through the building.
3. Smoke extraction and ventilation ducts
3. Smoke extraction and ventilation ducts
Get rid of smoke and slow down the development of fire
Smoke is often the main reason why people become victim of fire. When smoke and toxic gasses fill the space, it reduces not only the visibility, but also the amount of breathable air and leads to suffocation. Smoke is also a main factor in the spreading of fire. This is why a ducting system for smoke extraction is a key factor in your protection design.
4. Structural protection
4. Structural protection
Avoid the collapse of the loadbearing structure of the building
Once a building is on fire, the loadbearing structure can deteriorate and collapse. Structural protection safeguards the loadbearing structures (steel, concrete, timber, composite or others) in such a way that they will withstand high temperatures and maintain their load bearing capabilities. When a building is saved during a fire and is fit for repair and re-use, it is due to an efficient and well tested structural protection solution.
How can Promat help you?
With each step in your Passive Fire Protection Plan, you will need a reliable assessment of the risks and the right systems to protect your building. Promat can help you to understand your local regulations and to choose the right solutions with all the documents required.
Fire Safety Regulations
Fire Safety Regulations
A Passive Fire Protection Plan starts with a clear understanding of the legal requirements. We constantly monitor and analyse your local fire safety regulations and help you to write your technical report with all the documents you need to comply.
Get the right documents
Get the right documents
Collect all the right certificates and classification reports you need to make your design fully comply with your local regulations.
Call the experts
Call the experts
Our technical support team will be able to the answer all your questions, including the tough ones. Put us to the test.
Promat podrška
Promat podrška
Treba li Vam pomoć da biste našli to što tražite?
Javite se lokalnom Promat stručnjaku za protivpožarnu bezbednost da biste pronašli najbolje rešenje koje zadovoljava Vaše zakonske zahteve za protivpožarnu zaštitu.
Tehnička dokumentacija
Pronađite listove sa podacima o proizvodima, brošure o sistemima, deklaracije o performansama, uputstva za ugradnju i druge dokumente koji Vam trebaju da biste obavili posao.
