PROMATECT®-L

PROMATECT®-L is a lightweight mineral matrix engineered board which is white in colour and has a smooth sanded surface on one face with a lightly honeycombed texture on the reverse face.

PROMATECT®-L is resistant to the effects of moisture and will not physically deteriorate when used in damp or humid conditions. Performance characteristics are not degraded by age or moisture. Untreated surfaces will absorb water which can cause some loss of strength but strength is regained after drying. PROMATECT®-L does not encourage mould growth and is resistant to attack by vermin.

PROMATECT®-L is chemically inert and is resistant to diluted acids and alkalis. Boards should be protected where high chemical concentrations are likely to occur.

Further Information

Applications:

Fire protection of steel beams, ceilings, partitions and shaft walls.

Benefits:

  • Resistant to the effects of moisture
  • Not physically deteriorate when used in damp or humid conditions
  • Performance characteristics are not degraded by age or moisture
  • Does not encourage mold growth and is resistant to attack by vermin
Reaction to fire: A1, non-combustible
Use Category: Z1, Z2
Approx. Alkalinity (pH): 9 pH
Approx. Moisture Diffusion Resistance Min (μ): 3.2
Approx. Thermal Conductivity @ 20 °C (W/m°K): 0.083 W/m K
Bending Strength Longitudinal (N/mm²): 3.1 N/mm²
Tensile Strength Longitudinal (N/mm²): 1.3 N/mm²
Compressive Strength (N/mm² perpendicularly to the board surface): 2.4 N/mm²
Storage Conditions: Store in a dry and well-ventilated space, under cover, on a flat surface.

Please note
All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

 

Documents

60 Years of Expertise

Tested & Certified Solutions

Global Service Network