PROMAPAINT®-SC3

PROMAPAINT®-SC3 is a fiber-free, intumescent, one-component water-based paint with synthetic resins which is used for fire protection of steel and concrete structures.

Further Information

Applications:

Fire protection of steel and concrete structures

Benefits:

  • Single pack, fiber-free water-based intumescent paint
  • Structural Steel and Concrete Protection of up to 180 minutes
  • Compatible with commonly used primers
  • Compatible with many topcoats to provide durability for various usage classifications, from internal to external application
  • Produce a thin and seamless finish
  • Can be applied using brush, roller and also airless spray
  • For both open and hollow sections
  • Application onto galvanised steel is possible
  • Possesses low VOC contents
  • Quick application and easy cleanup
Approx. Curing Time ( µm after 8 hours 20°C, 50% humidity): 7 d
Density (kg/m³ ± 0.05kg/l): 1.35 g/cm³
Approx. Drying Time (hour at 20°C and 50% RH for 1 mm WFT): 6 h
Application Temperature Min (°C): 5 °C
Application Temperature Max (°C): 40 °C
Solids Content (%): 70 %
Viscosity (Pa.s at 20°C): 31000 cps
VOC Content (g/l): <10 g/l
Dilution: 3% with clear water
Colour: White

Please note
All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

 

Downloads

60 Years of Expertise

Tested & Certified Solutions

Global Service Network